Estimated Shipping Fees - calculating...
Amptweaker TightMetal Pro Distortion Effect Pedal
The TightMetal Pro distortion pedal can be used into a clean channel or as a preamp into an effects return or power amp. Since introducing the popular TightMetal distortion pedal in 2011Amptweaker has received many requests for a two button version. Unlike most distortion pedals with boostthe TightMetal Pro includes 2 Boost knobsone before and one after the distortion ¦..so it s easy to boost the gain AND volumefor the perfect solo tone. There s also a Midboost button that works with the output Boost knobto help solos cut through the mix. We also polled many customers who didn t like the TightMetalto find out what tone changes could be offered to reign in those other metal tones. The result is the Smooth Edge switch which cuts the high end sizzle for a warmer edgeand 2 Fat switches allow either the normal or Boosted tones to have a thicker attack with a bit more compression. There s also a High Gain switch to select between Vintage sounding metal or heavier modern metal gain. The added three band EQ allows for much tonal variationwith its Thrash button for more traditional deeper scooped mids. Our standard noise gate from the original TightMetal is also includedwith the hard stopping Chomp setting to help keep the rhythm as tight as possible ¦..especially when doing very quick riffs with a lot of palm-muted stops. Internal adjustments allow for tweaking the gate.
- Dual Lit Boost controls via Boost footswitch
- 3 Band EQw/ Smooth Edge sw. and Thrash sw.
- 3 effects loops ¦.UniversalBoost with Pre/Post switchesand the SideTrak loop that works when the pedal is OFF! Patch in clean effects
- GainTight & Volume Controls
- High Gain switch for heavier tonesoff for more vintage metal tones
- Noise Gate switch with Chomp setting for quick stopswith internal adjustmenttracks gain
- Added adjustable internal input noise gate for even more gating
- Mid switch with Thrash setting
- Mid Boost switch tweaks Boost similar to TightRock
- Internal Fat switches for warmer Rhythm and/or Boost tones
- Can be used as a preampor into a clean channel
- LED lit knobs when using a power supply
- Battery disconnect switch with red indicator
- Runs on 9V-18V batteries or supplies ‚like variacing your amp up and downor similar to 50W versus 100W tone
- Current: 18mA with 1 or 2-9V batteries22mA with 9V adapter24mA with 18V adapter(adapters add knob LEDs ¦.internal switch disconnects 1-9V battery clip
- DC Adapter jackstandard 2.1mm X 5.5mmcenter ground(-)
- BATTERIES/SUPPLY NOT INCLUDED
- Magnetic Battery access door opens w/o tools
- Handmade in the USA