{"product_id":"mesa-boogie-mark-vii-90-45-25w-1-x-12-inch-tube-combo-malaysia-amp-black","title":"Mesa Boogie Mark VII 90\/45\/25W 1 x 12-inch Tube Combo Amp - Black","description":"\u003ch3\u003e\u003cstrong\u003eMesa Boogie Mark VII 90\/45\/25W 1 x 12-inch Tube Combo Amp - Black\u003c\/strong\u003e\u003c\/h3\u003e\n\u003chr\u003e\n\u003cp\u003eIf you play electric guitar, chances are you’ve heard of John Petrucci and Dream Theater. You may even know of our 30-year relationship building many of his favorite amplifiers–the very same amplifiers you might have chosen for your sound. This distinguished list includes the MARK IIC+™, Dual Rectifier®, TriAxis™, MARK IV™ and MARK V™ to name a few. Inspired by our longstanding relationship with John Petrucci and more than 30 years of collaboration we are proud to introduce a MESA® first; The JP-2C™. Our first unlimited-build Signature Amplifier.\u003c\/p\u003e\n\u003cp\u003eIn celebration of John’s talent, his life-long dedication to our shared art, and the long relationship we’ve enjoyed with him, we are proud to introduce a MESA® first; The JP-2C™ - Our first unlimited-build Signature Amplifier. And YES, it’s a MARK IIC+! A next generation Re-Issue of the legendary amp so many Recording Artists, MESA enthusiasts and Tone Freaks the world over covet, often searching high and low to find. Only THIS IIC+ pulls in an enhanced feature set born from our collaboration with John over a period of three decades of research and development.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 OR 100 WATTS – THE HEART OF THE ORIGINAL MARK IIC+\u003cbr\u003e\u003c\/strong\u003e- A long-time MESA feature, directly off the classic MARK IIC+ and at the heart of this amplifier is the 60\/100 Power Switch. One of the very first “modern amp” features MESA pioneered in the late ‘60s, this switch puts the center two power tubes in Standby Mode and allows you to operate at a reduced power setting. This is great for smaller venues, rehearsals, increasing power tube life by swapping and also imparts a slightly brighter, snappier response that some find desirable. It also allows more power tube saturation at lower volume levels for those who may find that preferable. Either way, the 60\/100 switch adds versatility and options to the already impressive arsenal here in the JP-2C.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePULL SHIFT - MODIFIED TO PULL GAIN \u0026amp; PULL PRESENCE\u003c\/strong\u003e\u003cbr\u003e- In addition to the VOLUME 1 and LEAD MASTER control deletions from the original circuit, we’ve modified the PULL SHIFT feature layout of the original IIC+ to both simplify and enhance both high gain Channels 2 and 3. All PULL SHIFTS that were possible in the original IIC+ LEAD Mode are internally set to their optimized settings based upon the historical polling of savvy MARK IIC+ aficionados, artists and the MESA Design Team. In addition to these changes to the original circuit, we have added two new PULL SHIFT options on the JP-2C. A PULL GAIN on the GAIN control and a PULL PRES (shift) on the PRESENCE control. PULL GAIN increases the setting of the internally set VOLUME 1 control by approximately one number setting’s worth…in other words, just a little bit. This means that it is added to the already preset amount of gain\/drive that is in place when the pot is NOT pulled out. In both Channels this PULL GAIN feature allows a little boost of gain for specific musical styles.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGRAPHIC EQ x 2\u003c\/strong\u003e\u003cbr\u003e- The ONLY switch in each of the three Channels is the assignment switch for the two 5-Band Graphic Equalizers. This 3-position toggle allows assignment of either of the EQs to any of the three Channels, with the upper position engaging EQ 1 and the lower position employing EQ 2. The center position of the EQ switch allows you to either bypass or Footswitch the EQ on or off.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEQ WINDOW \u0026amp; FEATURE CONTROL SWITCHES\u003c\/strong\u003e\u003cbr\u003e- The 10 EQ Sliders that make up the two separate 5-Band Graphic Equalizers are housed in the EQ Window section of the Front Panel. Along with them, this section contains control switches for four other Functions\/Features. These are the Effects Loop, Reverb, Channel Select and the SHRED Voicing Mode. This convenient placement alongside the EQ Faders in this Window allows you to dial in your individual sounds and selections quickly and in one place, so that when storing the settings you have arrived at for a given sound under a Midi program number, there isn’t the need for a lot of jumping around on the Front Panel.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSHRED - A NEW VOICE IN HIGH GAIN\u003cbr\u003e\u003c\/strong\u003e- The JP-2C incorporates a new voicing feature in the high gain Channels not present in the original MARK IIC+ LEAD Mode that further enhances the harmonic layering of the top end. This 3-position switch located to the lower right of the EQ 2 window affects only Channel’s 2 and 3 and adds an additional layer of upper harmonic content in the high gain Modes. It is especially beneficial for high gain Crunch Rhythm sounds as it lends aggression and three-dimensionality to the sound, adding a harmonic haze that rides atop the fat, grinding wall of gain.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eREVERB - CHANNEL INDEPENDENT \u0026amp; FOOTSWITCHABLE\u003c\/strong\u003e\u003cbr\u003e- You’ll find our classic, rich all-tube REVERB on the JP-2C but with greater control and performance flexibility than the original IIC+. It can be auto-set to “On” all the time or set to “Off” or “Footswitchable” (on\/off) via the REVERB TOGGLE SWITCH located in the lower left corner of the EQ 1 Window. Each Channel also features its own REVERB blend control located on the left side of the rear panel.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX LOOP\u003c\/strong\u003e\u003cbr\u003e- The JP-2C features a fully buffered, tube FX Loop that can be auto-set to “ON” or is also MIDI switchable via the FX TOGGLE SWITCH located in the upper left corner of the EQ 1 Window.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCABCLONE™ D.I.\u003c\/strong\u003e\u003cbr\u003e- We’ve included our popular CABCLONE™ D.I. Cabinet Simulator and Recording Interface for convenient direct live or recording applications without the need for mic-ing, although you can do that as well for a blend of live speaker and direct sounds. The full complement of Voicing options from our stand-alone CABCLONE has been included here; CLOSED BACK, OPEN BACK and VINTAGE. This greatly increases the versatility of this feature for different sound styles. Other features in addition to the balanced XLR Output include Speaker MUTE, an Instrument\/Line LEVEL switch and GROUND\/LIFT options.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHEADPHONE OUT\u003c\/strong\u003e\u003cbr\u003e- Since the JP-2C contains our CABCLONE D.I. Cabinet Simulator and Recording Interface, all the elements for a great HEADPHONE Output were available so this is also included. This Cabinet Simulated Stereo ¼” Output captures the entire sound of the amplifier – power section and all. This HEADPHONE Output makes for convenient and inspired practicing in environments where the sound of a speaker cabinet is not ideal or cannot be used.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 OR 100 WATTS – THE HEART OF THE ORIGINAL MARK IIC+\u003c\/strong\u003e\u003cbr\u003e- A long-time MESA feature, directly off the classic MARK IIC+ and at the heart of this amplifier is the 60\/100 Power Switch. One of the very first “modern amp” features MESA pioneered in the late ‘60s, this switch puts the center two power tubes in Standby Mode and allows you to operate at a reduced power setting. This is great for smaller venues, rehearsals, increasing power tube life by swapping and also imparts a slightly brighter, snappier response that some find desirable. It also allows more power tube saturation at lower volume levels for those who may find that preferable. Either way, the 60\/100 switch adds versatility and options to the already impressive arsenal here in the JP-2C.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePULL SHIFT - MODIFIED TO PULL GAIN \u0026amp; PULL PRESENCE\u003c\/strong\u003e\u003cbr\u003e- In addition to the VOLUME 1 and LEAD MASTER control deletions from the original circuit, we’ve modified the PULL SHIFT feature layout of the original IIC+ to both simplify and enhance both high gain Channels 2 and 3. All PULL SHIFTS that were possible in the original IIC+ LEAD Mode are internally set to their optimized settings based upon the historical polling of savvy MARK IIC+ aficionados, artists and the MESA Design Team. In addition to these changes to the original circuit, we have added two new PULL SHIFT options on the JP-2C. A PULL GAIN on the GAIN control and a PULL PRES (shift) on the PRESENCE control. PULL GAIN increases the setting of the internally set VOLUME 1 control by approximately one number setting’s worth…in other words, just a little bit. This means that it is added to the already preset amount of gain\/drive that is in place when the pot is NOT pulled out. In both Channels this PULL GAIN feature allows a little boost of gain for specific musical styles.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGRAPHIC EQ x 2\u003c\/strong\u003e\u003cbr\u003e- The ONLY switch in each of the three Channels is the assignment switch for the two 5-Band Graphic Equalizers. This 3-position toggle allows assignment of either of the EQs to any of the three Channels, with the upper position engaging EQ 1 and the lower position employing EQ 2. The center position of the EQ switch allows you to either bypass or Footswitch the EQ on or off.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEQ WINDOW \u0026amp; FEATURE CONTROL SWITCHES\u003c\/strong\u003e\u003cbr\u003e- The 10 EQ Sliders that make up the two separate 5-Band Graphic Equalizers are housed in the EQ Window section of the Front Panel. Along with them, this section contains control switches for four other Functions\/Features. These are the Effects Loop, Reverb, Channel Select and the SHRED Voicing Mode. This convenient placement alongside the EQ Faders in this Window allows you to dial in your individual sounds and selections quickly and in one place, so that when storing the settings you have arrived at for a given sound under a Midi program number, there isn’t the need for a lot of jumping around on the Front Panel.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSHRED - A NEW VOICE IN HIGH GAIN\u003c\/strong\u003e\u003cbr\u003e- The JP-2C incorporates a new voicing feature in the high gain Channels not present in the original MARK IIC+ LEAD Mode that further enhances the harmonic layering of the top end. This 3-position switch located to the lower right of the EQ 2 window affects only Channel’s 2 and 3 and adds an additional layer of upper harmonic content in the high gain Modes. It is especially beneficial for high gain Crunch Rhythm sounds as it lends aggression and three-dimensionality to the sound, adding a harmonic haze that rides atop the fat, grinding wall of gain.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eREVERB - CHANNEL INDEPENDENT \u0026amp; FOOTSWITCHABLE\u003c\/strong\u003e\u003cbr\u003e- You’ll find our classic, rich all-tube REVERB on the JP-2C but with greater control and performance flexibility than the original IIC+. It can be auto-set to “On” all the time or set to “Off” or “Footswitchable” (on\/off) via the REVERB TOGGLE SWITCH located in the lower left corner of the EQ 1 Window. Each Channel also features its own REVERB blend control located on the left side of the rear panel.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFX LOOP\u003c\/strong\u003e\u003cbr\u003e- The JP-2C features a fully buffered, tube FX Loop that can be auto-set to “ON” or is also MIDI switchable via the FX TOGGLE SWITCH located in the upper left corner of the EQ 1 Window.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCABCLONE™ D.I.\u003c\/strong\u003e\u003cbr\u003e- We’ve included our popular CABCLONE™ D.I. Cabinet Simulator and Recording Interface for convenient direct live or recording applications without the need for mic-ing, although you can do that as well for a blend of live speaker and direct sounds. The full complement of Voicing options from our stand-alone CABCLONE has been included here; CLOSED BACK, OPEN BACK and VINTAGE. This greatly increases the versatility of this feature for different sound styles. Other features in addition to the balanced XLR Output include Speaker MUTE, an Instrument\/Line LEVEL switch and GROUND\/LIFT options.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHEADPHONE OUT\u003c\/strong\u003e\u003cbr\u003e- Since the JP-2C contains our CABCLONE D.I. Cabinet Simulator and Recording Interface, all the elements for a great HEADPHONE Output were available so this is also included. This Cabinet Simulated Stereo ¼” Output captures the entire sound of the amplifier – power section and all. This HEADPHONE Output makes for convenient and inspired practicing in environments where the sound of a speaker cabinet is not ideal or cannot be used.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFTSW and MIDI\u003c\/strong\u003e\u003cbr\u003e|- Three DIN jacks, one 8-Pin for the MESA Foot Controller, and two standard 5-pin DIN jacks for MIDI IN and THRU\/OUT are included for true connectivity and a number of ways to access the amazing sounds and pro features in the JP-2C. A STORE toggle switch allows simple one-touch writing and control of the JP-2C’s Amp Channels, Graphic EQs, Shred, Reverb and FX Loop to any of 256 MIDI Program Numbers. Storing the settings of these features is as easy as selecting a MIDI Program number on the Foot Controller (or Computer) and toggling the STORE key. There is also a mini MIDI Channel Rotary Selector for syncing of the MIDI Channel used by your Controller of choice.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch5\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWattage : 100 or 60 Watt Selectable (Global)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChannels \u0026amp; Modes : 3 Channels \/ 5 Modes\u003cbr\u003e\\Mode Voicings styles : \u003cbr\u003e- Ch. 1 = Mark IIC+ Clean \u003cbr\u003e- Ch. 2 = Mark IIC+ Gain or Shred \u003cbr\u003e- Ch. 3 = Mark IIC+ Gain or Shred\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGraphic Eq Reverb Fx Solo : Two Graphic EQs, Reverb \u0026amp; FX Loop\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFoot switchable Functions : Ch. 1, 2, 3, Reverb, Graphic EQ 1 \u0026amp; Graphic EQ 2\u003cbr\u003eSpeakers Impedance : \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight : Lbs.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions : H x 19 1\/8\" W x 9 1\/2\" D\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAvailable Formats : d \u0026amp; Rackmount Head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\u003c!-- split --\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eIs warranty coverage available for my product?\u003c\/h4\u003e\n\u003cp\u003eYes! Majority of our product provides a minimum 1 year warranty on the electronic parts.\u003c\/p\u003e\n\u003ch4\u003eWill this accessory fit my instrument well?\u003c\/h4\u003e\n\u003cp\u003eYou may check out the description section under each product page for your reference. Please do not hesitate to contact our sales team for further information via Whatsapp: 016-3111286.\u003c\/p\u003e\n\u003ch4\u003eCan I test the product prior to my purchase?\u003c\/h4\u003e\n\u003cp\u003eDefinitely! You can contact our sales team through 016-3111286 or head over to Music Bliss showroom to view the item before buying it. We are honored to have you over!\u003c\/p\u003e\n\u003ch4\u003eHow long will it take to deliver?\u003c\/h4\u003e\n\u003cp\u003eIt usually takes only 3-7 working days for the item to be safely delivered to your doorstep. Self-collection and Lalamove (local delivery) is available as well!\u003c\/p\u003e\n\u003ch4\u003eCan I self-collect my item(s)?\u003c\/h4\u003e\n\u003cp\u003eOf course! You can head over to Music Bliss showroom for self-collection during our working hours. \u003cbr\u003e10am - 7.30pm (Mon - Thurs) \u003cbr\u003e10am - 7pm (Fri - Sat) \u003cbr\u003e10am - 6pm (Sun)\u003c\/p\u003e\n\u003ch4\u003eCan I use Lalamove \/ Grab \/ Same Day Delivery as a delivery option?\u003c\/h4\u003e\n\u003cp\u003eYes! Please note that the delivery hour for Lalamove service is only available for local delivery, from 11am to 5pm daily. For delivery ,please check out choosing Lalamove\/Grab service or contact the mainline 016-3111286.\u003c\/p\u003e","brand":"MESA BOOGIE","offers":[{"title":"Default Title","offer_id":41759449251888,"sku":"2.M2C.RM","price":18759.0,"currency_code":"MYR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2929\/5648\/files\/mesa_boogie_e0556726-5da3-41ab-97b6-964417bc4a84.png?v=1746679617","url":"https:\/\/www.musicbliss.com.my\/products\/mesa-boogie-mark-vii-90-45-25w-1-x-12-inch-tube-combo-malaysia-amp-black","provider":"Music Bliss Malaysia","version":"1.0","type":"link"}