Lauten Audio Snare Mic Large-diaphragm FET Condenser

Throughout history, drummers have had few microphone options for accurately capturing their most important membranophone: the snare drum. Lauten Audio is here to finally give snare drums the representation they deserve with the aptly named Snare Mic, the first and only FET condenser microphone built specifically for snare drums. It may also be the last snare mic you need, considering the Snare Mic’s -28dB of off-axis rejection, more than 135dB SPL handling, and 20Hz–20kHz frequency response. Plus, excellent onboard sound shaping capabilities — three high cuts and three low cuts — ensure that the Lauten Audio Snare Mic will sound fantastic on any snare drum. The Snare Mic’s diminutive size (4.2 inches) lets it fit easily on any drum set, and its solid brass headframe plus mildew-resistant dust filter protects it from stick hits, drumstick wood shavings, and much more. Finally, a vibration-resistant capsule means that the Snare Mic is ready to be mounted either on your drum’s rim or on a mic stand.

FEATURES

• The world’s first and only FET condenser microphone custom-designed specifically to capture snare drums
• 28dB of off-axis rejection provides excellent snare separation
• 20Hz–20kHz frequency response captures your drum’s every detail
• More than 135dB of max SPL handling accommodates the hardest of hitters
• 4.2-inch size can be used on the densest of drum sets
• Ideal for mounting both stand and rim thanks to the vibrant-resistant capsule (based on Lauten’s award-winning Synergy series)
• Solid brass headframe plus mildew-resistant dust filter safeguards against stick hits, wood shavings, and other debris
• 80Hz low cut: reduces bleed from bass drums and toms
• 140Hz low cut: preserves your drum’s fundamental frequency while significantly reducing bleed and phase issues from bass drums and toms
• 5kHz high cut: greatly minimizes bleed from cymbals and onstage volume plus introduces a slight bump from 5–7kHz immediately followed by 7kHz drop-off
• 12kHz high cut: provides a dynamic microphone-style sound. Dips after 7kHz to reduce cymbal bleed while providing natural snare sound with a soft bump from 12kHz–15kHz
• Flat low cut and flat high cut settings allow all frequency information to pass

SPECIFICATIONS

• Microphone Type:Pressure Gradient FET Condenser
• Polar Pattern:Cardioid
• Diaphragm Size:1.25" (32mm)
• Frequency Response:20Hz-20kHz
• Max SPL:>135dB SPL (0.5% THD @ 1kHz)
• Output Impedance:>150 ohms
• Sensitivity:-66.0dBV/Pa
• Signal to Noise Ratio:79dB
• Self Noise:<15dB A weighted
• Color:Black
• Power Source:48V phantom power
• Dimensions:4.29" x 1.96"
• Weight:10.89 oz