Orange OR30 30-watt 1-channel Tube Amplifier Head - Orange (Made in UK)

Orange’s OR30 is a single-channel powerhouse of roaring tube amplifier tone, loaded with a combination of classic features and a plethora of bold new additions to the company’s timeless formula. This head’s distinctive design combines a tube rectifier, cathode bias, and 30 watts of tube-powered punch. The result? A rich blast of classic Orange amplification that goes from clean British-style chime to gooey and compression-heavy overdrive sag with the flick of a Gain knob. You also get a 3-position bright switch, cross-line presence control, and 3-band EQ to tweak your tone to perfection. Finally, while the Orange OR30 is a single-channel amplifier, a secondary footswitchable volume control can instantaneously swap between mild edge-of-breakup rhythms to full-bodied tube saturation, ensuring any lead line or solo will pop.

FEATURES

• Single-channel, British-style amplifier with 30W of roaring tube power
• Cathode bias design and tube rectifier for a raw, spongy sag when you push the amp into overdrive
• 3-position Bright switch grants you superior control over your tone’s treble response
• Cross-line Presence control designed to consistently function at all volume levels
• Effects loop to cleanly integrate your time-based and modulation effects pedals
• Secondary volume control that’s activated with a footswitch, allowing for far more dynamic control than a typical 1-channel amplifier
• Headroom (full 30W power) and Bedroom (2W power) scaling allows you to achieve sweet tube saturation at reasonable volume levels
• Massive output transformer results in a significantly higher level of perceived clean headroom
• Astoundingly low noise floor
• Designed and built in England to the highest standards

SPECIFICATIONS

• Type: Tube
• Number of Channels: Single
• Total Power: 30W/2W
• Preamp Tubes: 3 x 12AX7, 1 x 12AU7
• Power Tubes: 4 x EL84 (power), 5AR4 (rectifier)
• EQ: 3-band EQ, Bright Switch
• Inputs: 1 x 1/4"
• Outputs: 1 x 1/4" (16 ohm), 2 x 1/4" (8 ohm)
• Effects Loop: Yes
• Footswitch I/O: 1 x 1/4" (boost)
• Footswitch Included: No
• Bias Type: Cathode Biased
• Power Source: Standard IEC AC cable
• Height: 10.63"
• Width: 21.65"
• Depth: 9.45"
• Weight: 40.34"