Rode RODELink Newsshooter Kit Digital Camera-Mount Wireless Plug-On Microphone System without Mic

RODELink represents the next generation of digital wireless systems. Using a Series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The RODELink Newsshooter Kit provides everything you need to start shooting video wirelessly with XLR microphones, including a camera-mounted receiver and an XLR transmitter. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The transmitter (TX-XLR) easily connects to handheld presentation microphones as well as shotgun microphones, with a 3.5mm input and headphone output.

IN THE BOX:
- TX-XLR XLR wireless transmitter
- RX-CAM Camera-Mounted Wireless Receiver
- Captive TRS cable
- Newsshooter Bag
- Limited 1-Year Warranty, Extendable to 2 Years upon Registration

FEATURES

• The receiver can interface with up to eight different TX-XLR transmitters, and you can use the channel switcher to select between each individual transmitter; please note, however, that you can only receive audio actively from one transmitter at a time
• Compatible with any microphone sporting 3.5mm TRS or XLR connection points and necessitating power up to 48V
• Battery can last for up to seven hours
• Series II 2.4 GHz digital transmission with 128-bit encryption
• Transmitter supplies 48V phantom power and plug-in power
• Constantly monitors and hops between frequencies to maintain the strongest possible signal level at a range of up to 328′
• OLED display on receiver and transmitter with information on level, battery status, mutes, and channel selection
• Mounts on a standard camera shoe-mount and for added versatility the shoe mount can be located in one of two positions