B-STOCK (BS-256) M-Audio BX5 D3 5 inch Powered Studio Monitor (Unit)

The BX5 D3 was meticulously engineered to provide accurate sound reproduction. A high-current, high-headroom Class A/B amplifier drives a 5" military-grade Kevlar woofer and 1" silk dome tweeter. The speaker features a bi-amplified design, so it exhibits a sound that's both powerful and precise. A rear-mounted port was built to a specific length and diameter to produce deep, defined bass. A custom waveguide eliminates unwanted high-frequency scatter, ensuring that the BX5 D3's imaging is spot on. And don't worry about positioning — a front-panel LED shines brightly when the BX5 D3 is at the ideal monitor angle.

FEATURES

• Bi-amplified design with 100 watts (60 LF, 40 HF) for powerful, accurate sound
  
• 5” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
  
• 1” natural silk dome tweeter delivers superb transient details
  
• New computer-optimized tweeter waveguide for precise imaging
  
• Acoustic Space Control to fine-tune low-end response to your room
  
• Optimized rear port for extended low-frequency response
  
• XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
  
• Volume control enables you to dial in the perfect monitor playback level
  
• Ultra-wide range 52-35kHz frequency response covers full musical spectrum
  
• Front panel LED shines brightly when speaker is positioned at ideal monitor angle

SPECIFICATIONS

• TYPE 2-way near-field studio reference monitors
  
• LOW FREQ. DRIVER : 5 inch (127mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
  
• HIGH FREQ. DRIVER : 1 inch (25mm) magnetically shielded natural silk dome
  
• FREQUENCY RESPONSE : 52 Hz – 35 kHz
  
• CROSSOVER FREQUENCY : 2.5kHz
  
• LOW FREQ. AMPLIFIER POWER : 60W
  
• HIGH FREQ. AMPLIFIER POWER : 40W
  
• MAXIMUM PEAK SPL : 110 dB SPL - Full Bandwidth Pink Noise Measured
  
• INPUT SENSITIVITY : -10dBU
  
• INPUT CONNECTORS : 1x XLR balanced input connector 1x TRS balanced/unbalanced input connector
  
• INPUT IMPEDANCE : 10kΩ balanced, 20kΩ unbalanced
  
• POLARITY : Positive signal at + input produce outward LF cone displacement
  
• PROTECTION : RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse
  
• POWER : Voltage: 100–120V, 50/60 Hz / 220–240V, 50/60 Hz Consumption: 100W
  
• FUSE : 220–240V~ T1AL 250V / 100–120V~ T1.6AL 250V
  
• CABINET : Vinyl-laminated high-acoustic-efficiency MDF
  
• DIMENSIONS(WIDTH X DEPTH X HEIGHT) : 6.9” x 7.8” x 10” / 176 x 197 x 254 mm
  
• WEIGHT : 12.3 lbs, 5.6kg