Background Music PA System JBL VMA1240 240W Bluetooth Mixer Amplifier with JBL Control HST 100W 2-Way 5.25" Passive Wide-Coverage Speakers for Cafe, Restaurant, Bistro, Retail, Showroom

FEATURES

• 1x JBL VMA1240 Commercial Series 240W Bluetooth-Enabled Mixer/Amplifier
• 2x JBL Control HST 100W 2-Way 5.25" Passive Wide-Coverage Speaker - Black

JBL VMA1240 Commercial Series 240W Bluetooth-Enabled Mixer/Amplifier :

• 5-Input Mixer
• Supports USB Drives and Bluetooth
• 240W, 1-Output Amplifier
• Euroblock, RCA, and 1/4" Inputs
• Euroblock Outputs
• Per-Channel Bass and Treble Controls
• Voice-Activated Ducking
• Front-Panel Display and Controls
• Configurable Output Routing

JBL Control HST 100W 2-Way 5.25" Passive Wide-Coverage Speaker - Black :

• 5.25" Woofer and Dual 0.75" Tweeters
• 100W Long-Term Power Handling
• Wide 160 x 150° Pattern Control
• HST Eliminates Primary Wall Reflection
• Weather-Resistant IP54 Rating
• Integrated 60W Multi-Tap Transformer
• Supports 70V, 100V, or 8-Ohm Operation
• Passive High-Slope Crossover Network

SPECIFICATIONS

JBL VMA1240 Commercial Series 240W Bluetooth-Enabled Mixer/Amplifier :

• Output Power : 240 W (per channel into 4 Ohms or 8 Ohms, 1 kHz, ≤0.5% THD)
• Insertion Loss : 70 V and 100 V Outputs: 1 dB maximum
• Input Channels : 5
• Output Channels : 1
• Tone Controls : Bass and Treble non-detented potentiometers on each channel | Bass : ±14 dB @ 50 Hz | Treble : ±14 dB @ 10 kHz
• Input Sensitivity : To obtain full rated power (load of 8 Ohms) | Mic Input : 5.5 mVrms | Line Input : 1.3 Vrms | RCA Input (Stereo In) : 130 mVrms
• Frequency Response : Measured at 2.83 Vrms into rated load impedance at any output | 4/8 Ohms Output : 20 Hz to 20 kHz, ±2 dB | 70 V/100 V Outputs : 80 Hz to 15 kHz ±3 dB
• Total Harmonic Distortion (THD) : Measured at 2.83 Vrms into rated load impedance at any output | Power Amp Output
• Signal-to-Noise Ratio : >76 dB (reference rated power, mixer levels @ minimum, master volume @ maximum A-weighted)
• Input Impedance : Nominal Mic : 400 Ohms | Line : 20 kOhms (balanced) | RCA : 50 kOhms
• Phantom Power : 27 VDC
• Crosstalk : -70 dB (reference rated power, volume at mid position, 1 kHz)
• Nominal Input Voltages : Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz
• Minimum Load Impedance : Low Impedance Output: 4 Ohms | 70 V Output : 20 Ohms | 100 V Output : 40 Ohms
• Operating Temperature : 32 to 95°F / 0 to 35°C
• Humidity : 95% RH (non-condensing)
• Storage Temperature : -4 to 185°F / -20 to 85°C
• Dimensions (W x D x H) : 17 x 16.3 x 3.5" / 432 x 415 x 88 mm

JBL Control HST 100W 2-Way 5.25" Passive Wide-Coverage Speaker - Black :

• Frequency Range (-10dB) : 50 Hz – 20 kHz
• Frequency Response (±3 dB) : 68 Hz – 18 kHz
• Coverage Angle : 180° H x 160° V (1 kHz – 2 kHz, nominal) 160° H x 150° V (ave, 1 kHz – 16 kHz)
• Directivity Factor (Q) : 5.4 (1 k – 16 kHz)
• Directivity Index (DI) : 7.2 dB (1 k – 16 kHz)
• System Power Rating (IEC) : 100 W (400 W peak), 2 hrs. 75 W (300 W peak), 100 hrs.
• Sensitivity : 88 dB (Ave. 80 Hz – 20 kHz)
• Maximum SPL (1m) : Direct 8Ω: 108 dB (peaks of 114 dB) 60 W Tap: 97 dB @ 60W
• Crossover Network : 1.6 kHz, 3rd order (18 dB/oct) high-pass to HF, 2nd order low-pass to LF
• Impedance : 8 ohms
• Transformer Taps : 70V: 60W, 30W, 15W, 7.5W 100V: 60W, 30W, 15W
• Drivers : LF: CMMD™ ceramic metal matrix diaphragm cone, 25 mm (1 in) voice coil. | HF: Two splayed tweeters with CMMD-treated aluminum diaphragms, polyurethane surround, polyimide bobbin, neodymium magnet, and fluid-cooling.
• Enclosure : Fiberglass-reinforced ABS
• Attachment : Four M6 points for included U-bracket. Additional M6 insert point provided for adding secondary safety attachment cable. U-bracket must be utilized. Must be mounted on wall surface. Do not mount on pole.
• Grille : Aluminum grille, painted to match cabinet color.
• Input Connectors : Removable locking euro-block 4-pin connector with screw-down terminals for bare wire. Two pins for input and two pins for parallel loop-thru. Max. wire 12 AWG (2.5 mm2).
• Outdoor Capability : IP54 per IEC529. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray.